Having issues in maintaining your batteries? Intellitec Products, LLC introduces the Battery Guard® 1000. Able to fit in most systems, the Battery Guard® 1000 (00-01118-000) offers automatic battery protection and management. Whether you are traveling the country in a RV, or running electrical equipment in a work truck, the Battery Guard® 1000 prevents your chassis and coach batteries from draining and becoming damaged. Applications for battery management are:
The Battery Guard® 1000 provides a solution for protecting your batteries from discharging to a level that might damage your batteries or to a level that prevents a battery from being started. The Battery Guard® 1000 constantly monitors the voltage level of the battery to determine the level of charge. When the voltage drops below the low voltage threshold for a specified duration of time, the Battery Guard® 1000 will automatically disconnect the battery from the system load, protecting the battery from excessive discharge.
If the Battery Guard® 1000 senses a charging potential for a specified duration of time, then it will automatically reconnect the system load. This condition usually occurs when a charging device is connected to the battery or the engine is running.
Automatic Disconnect/ Reconnect
The BG1K constantly monitors the voltage level of the battery to determine the level of charge. When the voltage drops below the low voltage threshold, the battery will disconnect from the system load, protecting the battery. If there is a charging potential, the BG1K will reconnect the load.
With a unique all in one design, we combined our Battery Disconnect Relay with our Battery Guard® system. This allows for minimal wire connections. Additionally we provide a mounting plate requiring only two screws. With minimal knowledge one can easily install the BG1K into your battery management system.
Our BG1K features a latching mechanism that only draws power when switching in between states. This prevents the BG1K from causing a parasitic draw. The BG1K also helps reduce wasted energy as well as prevents your batteries from discharging, preventing your need to take in more energy to maintain your battery.
Push Button Switch
The BG1K can also be controlled manually with the push of a button. The LED ring around the push button also provides the user with valuable information about the state of disconnect. By looking at the LED, know whether you are connected, disconnected or running low on charge.
Designed & Manufactured in USA
Every BG1K is manufactured in our production facility located in DeLand, FL. Combining quality materials with decades of manufacturing knowledge, our team of engineers and production staff ensure very BG1K that leaves the facility meets our stringent quality standards.
Low Voltage Warning
Monitoring your battery is important, that's why we alert you to a low battery charge. This allows the system to automatically disconnect the battery from the load.
Status Fault Indicator
In the instance the BG1K fails to operate as intended, we have provided a diagnostic LED that indicates several failure modes. This allows for easier troubleshooting and correcting of the issue at hand.
Have any questions on the Battery Guard® 1000 or other Intellitec products?
Fill out the form on the right and we will get back to you with your requested information. For information on other Intellitec products, check out the Products Page. Here you will find Intellitec's Product catalog featuring products in:
We look forward to helping you keep your batteries protected and charged, and you on the road.