Battery Disconnect 100A
01-00055-000
The Intellitec Battery Disconnect 100A utilizes a patented, mechanical, latching mechanism. This incredibly robust and cost-effective design only draws power when changing states, making it a "Green" product. With over 2,000,000 battery disconnects in operation world-wide, Intellitec is the global leader in battery management.
This Intellitec Battery Disconnect is rated for 100 Amps continuous and is available in fused and non fused 12V models as well as a fused 24V model. Intellitec can supply the OEM with a kit for your Battery Disconnect requirements complete with harness, switch, install kit and disconnect.
Buying Options (01-00055-000)
Buying Options (01-00055-002)
Part Numbers
12V Models:
01-00055-000 - Fused
01-00055-002 - Non-Fused
01-00055-010 - Marine
24V Models
01-00055-242 - Non-Fused 24V
Documents
| Amperage | 100 Amps | 100 Amps |
| Nominal Actuation Voltage | 12V | 24V |
| Actuation Current | 6 Amps | 6 Amps |
| Minimum Actuation Voltage | 9 Volts | 18 Volts |
| Maximum Continuous Carry Current | 100 Amps | 100 Amps |
| Maximum Ambient Temperature | 185 Degrees F. | 185 Degrees F. |
| Minimum Ambient Temperature | -40 Degrees F. | -40 Degrees F. |
| Contact Life at Full Load | Min. of 20,000 Cycles | Min. of 20,000 Cycles |
| Max. Actuation Time | 0.2 Seconds | 0.2 Seconds |
| Height | 3.61 in | 3.61 in |
| Width | 3.66 in | 3.66 in |
| Depth | 2.58 in | 2.58 in |
| Relay | Latching | Latching |
Battery Disconnect Kits
100A Single Disconnect W/ No Display
10-01114-000
Intended for remote disconnect of either chassis or auxiliary battery of a vehicle. This BDX system includes 1x 100A battery disconnect relay, 20 ft. of cable, BDX monitor panel with disconnect status.
Kit includes:
- (1) BD0
- (1) Relay-Battery Disconnect - 12V/100A
- (1) 20 ft BD0 Harness
Buying Options (00-01114-000)
100A Single Disconnect Kit
10-01090-001
Intended for remote disconnect of either chassis or auxiliary battery of a vehicle. This BDX system includes
1x 100A battery disconnect relay, 25 ft. of cable, BDX
monitor panel with voltmeter, and ignition interlock to prevent disconnection while engine is running.
Kit includes:
- (1) Battery Disconnect 100A
- (1) Relay-Battery Disconnect - 12V/100 Amp
- (1) 25 ft Single BDX Battery Harness
Buying Options (00-01090-000)
100A Dual Disconnect
10-01090-101
Intended for remote disconnect of both auxiliary and chassis batteries of RVs and specialist vehicles with dual batteries. This BDX system includes two 100 A battery disconnect relays, 25 ft. of cable, and BDX monitor panel with two LED ON/OFF indicators, digital voltmeter and ignition interlock to prevent disconnection while engine is running.
Kit includes:
- (1) Universal BCC Switch Panel
- (1) Relay-Battery Disconnect -12V/100A
- (1) 25 ft BDX Harness
Buying Options (00-01090-100)
Kit Documents